Plumbing

This kit includes the components and seals for rebuilding Sporlan Valves. 1 Plunger Assembly 1 Diaphragm Assembly 1 Enclosing Tube O-Ring Instruc...

The Twis-Loc termination system provides a truly durable sewer hose connection. Six sturdy lugs secure the 45° adapter to the lug ring providing a ...

The "Housebroken" Sewer Hose Specifications Color: Brown Material: Polypropylene Length: 20' fully extended, 64" collapsed UV protected Will la...

The Twis-Loc termination system provides a truly durable sewer hose connection. Six sturdy lugs secure the 45° adapter to the lug ring providing a ...

12 volt replacement solenoid for Sporlan Valves

Valve for controlling hot water and coolant flow. 1/2" NPT Female Coil sold separately (use MKC-1 coil assembly) 12 Volt Not for use on hazardous...

Termination cap used in the Twis-Loc termination system

Connects sewer hose to waste valve outlet Fasten 3" sewer hose onto hose adapter using hose clamp Bayonet fitting connects to lug fitting on wast...

The Twis-Loc termination system provides a truly durable sewer hose connection.  Simply glue the lug ring onto the 3" discharge pipe from your ter...

The Dupree Twis-Loc Valve locking ring is larger than other brands allowing for more torque to be applied with less effort. The locking ring is us...

• Also known as a 1/8 bend For use in a Drain, Waste and Vent (DWV) system to provide a 45 degree angle • ABS solvent cement required for installat...

Converts 3" tank outlet to 1-1/2" opening (ABS solvent cement required for proper installation) Made of ABS

Specifications Part Number:  A 30 06 132 260 Kit Size: 12 V Kit Contents: 2 Pre-Strung Fill Caps with 1/4 turn vent openings, 5' Hose

Specifications Part Number:  A 21D 06 137 169 Kit Size: 12 V Kit Contents: 6 Fill Caps with 3/4" push-in vent openings, 7' Hose, 1 All In One Coup...

Specifications Part Number:  20D 06 133 169 Kit Size: 12 V Kit Contents: 6 Fill Caps with 3/4" screw-in vent openings, 6' Hose

Connects a branch line to a vertical drain line • Can be installed vertically or horizontally • Made of ABS

Chromalox 2E754

AquaPro Fill Caps: Snap In Fill Cap with Yellow Float (#60) 3/4" Push In Fill Cap with Float for 4-8D 1/4 Turn Bayonet Fill Cap with Yellow Float ...

AquaPro Floats: Float No: 66 (blue) Float for 4D, 6D, 8D Float for T plus series Float No: 60 (yellow) Float for 3/4" vent openings Float No: 71 (...

Dual Port for hose with I.D. 6mm 1/4"

Johnson Pumps 10-13395-103 AquaJet WPS 3.5 Water Pressure Pump Specifications Body: Polypropylene Valve Housing: Polyamide Valves: EPDM Connection...